PUMP ACCESSORIES WATER PUMP ACCESSORIES - PUMP AND PRESSURE CONTROLLERS Water pump accessories Press control Hydrogel IP65 The pump control is a flow switch that fully automatically turns the pump on or off when the tap or valve is opened or closed. The pump control protects the pump from running dry. Suitable for centrifugal pumps and pressure submersible pumps up to 2 HP (16 Amp.) This pump control is suitable for use in humid areas. Connection 1" Minimum capacity 15 L/h. Maximum capacity 7500 L/hr at max pressure 10 bar and 230V. SKU Product Conn. Amp. Max kW Max Volt Pressure (bar) B2.03.150 Press control Hydrogel IP65 1” 16 1.5 230 10 Coelbo Controlmatic 230V with surface-mounted socket The Controlmatic is a compact device standard with pressure gauge for the automatic control and protection of electric pumps. The system contains a special electronic sensor for flow and pressure, which causes the pump to start when water is drawn and stop 10 seconds after the water draw-off stops. The controller has a dry run protection. The Controlmatic has 1.5 meter cable and plug and a surface-mounted socket on the pump side. The maximum capacity 8m³/h at maximum pressure of 10 bar and 230V. SKU Product Conn. Amp. Max kW Max Volt Pressure (bar) A2.03.120 Coelbo controlmatic 12 amp. (max 1.5hp 230V) 1" 12 1.1 230 10 Coelbo Digimatic digital pump controller 230V Digital pump controller controlling monophase pumps up to 3hp. This device has all the functions of traditional electric pump controllers, with an integrated digital pressure gauge. The starting pressure can be adjusted extremely precisely, the thermal protection can be adjusted for each pump Maximum capacity 6m³/h, 16 Amp. 3hp and 230V. Connection 1" - 1". SKU Product Conn. Amp. Max kW Max Volt Pressure (bar) A2.03.117 Coelbo Digimatic 16 amp. (max 3hp 230V) 1" 16 2.2 230 10 Coelbo Digiplus digital pump controller 230V Digital pump controller controlling monophase pumps up to 3hp. This device has all the functions of traditional electric pump controllers, with an integrated digital pressure gauge. The controller can operate in pressure dependent mode, with on-off pressure, or on-off mode, on-off pressure and stops when there is no flow. The starting pressure can be adjusted extremely precisely, the thermal protection can be adjusted for each pump. Maximum capacity 10m³/h, 16 Amp. 3hp and 230V. 1.1/4" connection. Switch-on pressure adjustable between 0.5-7 bar. Shut-off pressure adjustable between 1-8 bar. IP 65. SKU Product Conn. Amp. Max kW Max Volt Pressure (bar) B2.03.160 Coelbo Digiplus 16 amp. (max 3hp 230V) 1.1/4" 16 2.2 230 8 Coelbo Optiplus Procontrol 230V The Optiplus is a compact device standard with pressure gauge for the automatic control and protection of electric pumps. The system contains a special electronic sensor for flow and pressure, which causes the pump to start when water is drawn and stop 10 seconds after the water draw-off stops. The procontrol has dry-running protection. The Optiplus has 1.5 meter cable and plug and to the pump side 0.5 meter stripped cable. The maximum capacity 10m³/h at maximum pressure of 10 bar and 230V. SKU Product Conn. Amp. Max kW Max Volt Pressure (bar) A2.03.118 Coelbo Optiplus 22 RMC 1.1/4" 16 amp. (max 3hp 230V) 11/4" 16 2.2 230 10 197 For our current prices, visit en.mpi-pumps.com or scan the QR code.
RkJQdWJsaXNoZXIy MTkyODMyNw==