RAINWATER & DISCONNECTION PRE- AND POST FILTERS - PRE-FILTERS Pre- and post filters Pre- and post filters Wisy cyclone filter The Wisy cyclone filter is designed for rainwater filtration and is placed underground. Connected to a horizontal supply line, the rainwater is filtered and fed to the cistern. The vortex motion moves rainwater over the vertical stainless steel cylindrical filter element. Centrifugal force sucks the rainwater through the filter meshes. Dirt particles larger than 0.18 mm are diverted with the residual water to the drainage system with a filtering efficiency of 90%. Housing made of polypropylene; filter insert in inox 1.4301 and mesh size 0.18 mm. SKU Product Roof top. C9.01.120 Wisy WFF 100 250 m² 3P Rainus leaf catcher The leaf catcher is specifically designed for rainwater filtration. Connected to a vertical supply line, the rainwater is filtered and then fed to the cistern. Debris is ejected forward while the filtered rainwater runs down through the screen. The sieve can be easily cleaned when soiled Capacity: 70 m² roof area Connection dimensions: 80mm and 100mm SKU Product Connection (mm) Roof top. B9.01.384 3P Rainus leaf catcher (gray) 80 en 100 70 m² 3P compact filter The smallest rainwater filter for installation in rainwater tanks made of polyethylene or concrete. This filter can be used where space is limited or where there is no difference between the inlet and outlet. Retro-fitting with 3P rewind device PF+SF is possible. An opening is installed within the filter housing that can be used. The 3P cartridge filter is ideally suited for use with a 3P overflow Siphon duo and the 3P Calmed inlet. Connection capacity for roof area up to 213 m² with rainfall capacity up to 300 l/(sxha). SKU Product Conn. Max. Rainfall roof head 200l/(sxha) Max. Rainfall roof volume 300l/(sxha) Max. Flow B9.01.355 3P compact filter DN 100 320 m² 213 m² 6.4 l/s Cartridge filter Small rainwater filter for installation in rainwater tanks made of polyethylene or concrete. The slope of the filter screen flushes debris into the sewer. Filter cartridge mesh made of stainless steel in plastic housing. Retro-fitting with 3P rewind device PF+SF is possible. An opening is installed within the filter housing that can be used. The 3P filters are ideally suited for use with a 3P Overflow Siphon duo and the 3P Calmed inlet. The bottom or side adapter is used as the inlet to the rainwater tank. There you can also install a quiet supply. Connection capacity: for roof areas up to 387 m² / 1347 m² The filter should be cleaned several times a year Material cascade insert: Polyethylene Ø 410 x 275 mm Maas size: 1 mm Dimensions: 305 x 402 mm SKU Product Conn. Max. Rainfall roof head 200l/(sxha) Max. Rainfall roof volume 300l/(sxha) Max. Flow B9.01.346 3P cartridge filter DN 100 320 m² 213 m² 6.4 l/s 167 For our current prices, visit en.mpi-pumps.com or scan the QR code.
RkJQdWJsaXNoZXIy MTkyODMyNw==